• PLASTER: New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces. The roof must have a positive slope/drainage system to avoid water ponding at places.
• CLEANING: Surface should be free from any loose paint, dust, or grease. Remove all existing bitumen coatings completely. It is recommended to use intense wire brushing, a high-speed water jet, and a vacuum cleaner for thorough cleaning of the surface to avoid “peeling off” problems.
• REPAIRING: The substrate must be checked for its soundness using a small hammer. All cracks at corner joints, channels, and parapets should be properly treated.
• FILLING FOR CRACKS: For filling cracks of up to 10mm use MRF crack filler. Bigger cracks, damaged portions, and hollow areas must be repaired with polymer modified cement mortars.

Vertical Surface
Apply the first self-priming coat of Aquafresh Dampgarde by diluting with 33% water.

Apply a coat of Aquafresh Dampgarde without any dilution.

Apply 2 coats of Aquafresh/Altura top coat products as per the recommended dilution.

Horizontal Surface
Apply the first self-priming coat of Aquafresh Dampgarde by diluting with 33% water.

Apply the first coat of Aquafresh Dampgarde without any dilution.

Apply the second coat of Aquafresh Dampgarde without any dilution in a perpendicular direction to the first coat.

Roller or Brush or Conventional Spray, Nozzle Orifice: 0.059 inches, Pressure: 35 – 45 psi.