Ensure that the surface is clean and free from dampness, dirt and other contamination.

Sand the surface using #180 Sandpaper and clean thoroughly.

Ensure that no loose particles are sticking to the wall For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process

Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.

Ensure that fresh walls are coated with one or two coats of white cement

Apply 2 coats of Wall Primer Interior with an interval of 3 – 4 hrs between subsequent coats

Undulations in the wall can be levelled using any good quality acrylic putty or cement powder putty

Putty should be used between the first and second coat of Wall Primer Interior and sanding of the putty shall be done as per recommendation

Sanding of the second coat of Wall Primer Interior can be done using #320 Sandpaper

Topcoat can be applied after an interval of 3 – 4 hrs of the second coat of Wall Primer Interior

Stir well before thinning the Paint

Mix 35 – 40% of potable water